Environmental Protection Equipment
Supplementary pollution-control equipment scope from Huisheng product scope, positioned secondary to monitoring instruments.
Environmental Protection Equipment for pollution-control projects
Supplementary fixed pollution-source exhaust treatment and water treatment equipment from Huisheng product scope, including dust collectors, activated carbon, RCO/RTO, scrubbers, desulfurization, denitrification, UF, RO, NF, MBR and sludge treatment.
Huisheng product scope lists fixed pollution-source waste gas treatment and water treatment equipment. This category remains secondary because the main positioning is monitoring instruments, but it supports projects that require treatment equipment together with monitoring or sampling products.
The supplementary treatment scope now includes the new treatment documents: RCO catalytic combustion, UV photolysis activated carbon integrated equipment, baghouse and cartridge dust collectors, spray scrubber towers, wet electrostatic precipitators, biological deodorization equipment and integrated wastewater treatment equipment. These are positioned as support equipment for projects that require treatment routes together with monitoring, sampling or laboratory verification.
Equipment data from supplied material
This table keeps the equipment values, routes and material options stated in the supplied product material. Selection notes and related-product links elsewhere on the page are website guidance, not added hard specifications.
Huisheng supplementary fixed pollution-source and water-treatment equipment scope. Final sizing still depends on site conditions, but the values in this table are kept to the supplied material.
| Item | Specification / selection note |
|---|---|
| Dust treatment scope | Bag dust collector, cartridge dust collector, cyclone dust collector, wet dust collector and wet electrostatic dust collector |
| VOC exhaust treatment scope | UV-activated carbon, activated carbon adsorption equipment, RCO catalytic combustion, RTO regenerative thermal oxidizer and adsorption-desorption catalytic combustion routes |
| Flue gas treatment scope | Desulfurization tower, SNCR / SCR denitrification and integrated desulfurization-denitrification equipment |
| Water treatment scope | Pretreatment equipment, biochemical treatment equipment, integrated wastewater treatment equipment, MBR, UF, RO, NF, EDI, softening water and sludge treatment equipment |
| Positioning note | This supplementary equipment scope is discussed when it supports a wider environmental monitoring or treatment project |
Configured around the actual treatment route
The target metal indicator, expected concentration range and sample matrix must be confirmed before the analyzer model is finalized.
Project-specific wastewater, exhaust gas or pollution control applications
Air volume, water volume, pollutant type, temperature, humidity, corrosion and inlet condition affect configuration.
Treatment body, fans, ducts, pumps, control cabinet, safety protection and maintenance access are reviewed by route.
Hard parameters are kept to supplied product material; final sizing is confirmed by project condition.
Selection notes kept separate from source parameters
Huisheng reviews the treatment route, handled medium, capacity, material, outlet target and auxiliary systems before confirming a configuration. Documented values remain in the technical data table, while project pairing and monitoring-interface notes are treated as selection guidance.
Hard values are kept to the supplied product material. Project-specific sizing is treated as selection work, not as a new published parameter.
Exhaust gas, dust, odor, flue gas polishing or wastewater condition should be confirmed before choosing the treatment route.
Air volume, water volume, pollutant load and outlet requirement determine final equipment sizing.
Q235, 304 stainless steel, FRP, PP or anti-corrosion options are selected according to the documented material scope and site condition.
Fans, ducts, pumps, control cabinets, safety protection and monitoring interfaces are discussed as configuration notes.
Parameters and scope stated in supplied material
The items below summarize capacity, material, process route, efficiency or equipment-scope information from the supplied product material. Extra project advice stays in selection notes instead of becoming a published hard parameter.
Bag filter
Bag filtration route for dust collection, selected by dust load, air volume and maintenance access.
Cartridge filter
Cartridge filtration route for compact dust-control points and lower-to-medium dust loading.
Spray scrubber
Wet washing route for paint mist, acid or alkaline exhaust, odor pretreatment and downstream equipment protection.
UV + activated carbon
Two-stage low-concentration VOC and odor route combining UV photolysis with carbon adsorption.
RCO
Regenerative catalytic oxidation route for VOC projects needing adsorption concentration, desorption and catalytic treatment.
Wet electrostatic
Deep polishing route for fine dust, acid mist, tar mist and humid flue gas aerosol removal.
Biofilter
Biological deodorization route for medium- and low-concentration odor gas using microbial degradation.
Integrated wastewater
Packaged wastewater treatment route for decentralized domestic, small medical or low-strength industrial wastewater.
How the equipment fits into a treatment route
Treatment equipment is configured by process route, pollutant type, air or water volume, material requirement and installation condition. Monitoring or sampling interfaces are considered only when the project needs them.
Pollution source and process review
This part is configured according to the selected model and actual site conditions.
Exhaust gas or water treatment route
This part is configured according to the selected model and actual site conditions.
Equipment sizing and installation discussion
This part is configured according to the selected model and actual site conditions.
Monitoring interface where needed
This part is configured according to the selected model and actual site conditions.
Export communication and specification preparation
Data acquisition, alarm output and communication must match the project platform or reporting requirement.
Where this equipment is usually discussed
This equipment is discussed when the project needs monitoring or supporting treatment equipment matched with the actual site, medium, parameter and reporting requirement.
Discussed as supporting equipment when pollution control and monitoring requirements are reviewed in the same project.
Discussed as supporting equipment when pollution control and monitoring requirements are reviewed in the same project.
Discussed as supporting equipment when pollution control and monitoring requirements are reviewed in the same project.
Used where discharge quality, treatment stability or final outlet trends need to be followed with clearer online data.
Discussed as supporting equipment when pollution control and monitoring requirements are reviewed in the same project.
Verified product photos for model review
Treatment equipment photos are shown as supplementary product views for projects that combine treatment and monitoring needs.
