VOC & Toxic Gas Detector
TY2000-D portable VOC and toxic gas detector with flexible sensor configuration and up to seven gas sensors installed simultaneously.
VOC & Toxic Gas Detector for environmental monitoring projects
TY2000-D VOC / toxic and hazardous gas detector for emergency monitoring, occupational health, petrochemical safety inspection and leak detection.
TY2000-D is designed for field detection of toxic and hazardous gases in ambient air, emergency leak monitoring, occupational health workplaces, petrochemical safety inspection and storage tank, pipeline or valve leak detection.
Sensor configuration is flexible. The product supports catalytic combustion, electrochemical, infrared and PID sensor options, and states that up to seven different gas sensors can be installed at one time. Specific VOC detection range can reach 1 ppb to 10000 ppm, and hundreds of VOC correction factors are built in.
Technical data for model selection
Review the main measuring range, output interface, operating conditions and configuration notes before quotation.
Huisheng confirms the final model, range and site configuration according to sample condition and monitoring requirement.
| Item | Specification / selection note |
|---|---|
| Detection scope | VOC, H2S, NH3, CO, O2, combustible gases and other project-specific hazardous gases |
| Project use | Fixed or portable detection for industrial sites, workshops, storage zones, boundary points and emergency monitoring |
| Selection basis | Target gas, measuring range, alarm requirement, installation form and site condition |
| System connection | Can be discussed with VOC online monitoring, industrial park monitoring and plant-boundary monitoring |
Configured around the actual monitoring point
VOC measurement and sampling path depend on target compounds, range, response time and method.
VOC emission sources, plant boundary air, workshops or hazardous gas areas
Temperature, moisture, dust, solids, corrosive components or compound type may affect configuration.
Analyzer, detector, sampler, cabinet, pretreatment and data output can be combined as one product package.
Specifications are prepared according to the selected model and actual project requirement.
Details Huisheng reviews before confirming a model
Huisheng reviews the product model together with the measured medium, target range, sampling condition, installation position and required specifications. This keeps the product discussion tied to the real monitoring point.
Expected concentration or detection level helps determine the model and measurement method.
Temperature, moisture, suspended solids, dust, corrosion or target compound behavior may change the configuration.
VOC measurement and sampling path depend on target compounds, range, response time and method.
Fixed point, boundary point, workshop area, mobile unit or portable inspection use
Communication output, alarm logic and model-specific specifications depend on the selected model.
Monitoring indicators covered by this product series
The final parameter package depends on the selected model, measuring range, sample condition and data output requirement. For many projects, one instrument is part of a complete monitoring point rather than a stand-alone purchase.
TY2000-D
Detector configuration item for VOC, toxic gas, oxygen, combustible gas and leak inspection tasks.
VOC
Gas indicator used for VOC, toxic gas, hazardous area or industrial boundary monitoring.
PID
Detector configuration item for VOC, toxic gas, oxygen, combustible gas and leak inspection tasks.
Electrochemical
Detector configuration item for VOC, toxic gas, oxygen, combustible gas and leak inspection tasks.
Infrared
Detector configuration item for VOC, toxic gas, oxygen, combustible gas and leak inspection tasks.
Catalytic combustion
Detector configuration item for VOC, toxic gas, oxygen, combustible gas and leak inspection tasks.
1 ppb-10000 ppm
Detector configuration item for VOC, toxic gas, oxygen, combustible gas and leak inspection tasks.
Up to 7 sensors
Detector configuration item for VOC, toxic gas, oxygen, combustible gas and leak inspection tasks.
How the product fits into a complete monitoring chain
Most projects connect the product with sample access, conditioning, measurement, data acquisition and reporting. The exact arrangement depends on the site and selected model.
Sensor chamber with flexible sensor positions
The measurement section is selected by parameter, range, method and project standard.
PID / electrochemical / infrared / catalytic sensor options
The measurement section is selected by parameter, range, method and project standard.
Sampling rod option
The sample access point determines whether filtration, heating, flow control or preservation is required.
Alarm and data display interface
This part is configured according to the selected model and actual site conditions.
VOC gas selection and correction factor library
This part is configured according to the selected model and actual site conditions.
Where this equipment is usually discussed
VOC and toxic gas applications are usually defined by the emission source, boundary point, workshop zone or emergency detection task. Target compounds, response time and installation method decide the product direction.
Configured according to the monitoring point, sample condition, installation environment and expected data use.
Configured according to the monitoring point, sample condition, installation environment and expected data use.
Used around process areas, storage zones and boundary points where VOC or hazardous gas monitoring is required.
Used around process areas, storage zones and boundary points where VOC or hazardous gas monitoring is required.
Used around process areas, storage zones and boundary points where VOC or hazardous gas monitoring is required.
