UV Flue Gas Analyzer
MH3200A UV flue gas analyzer for stack gas analysis, CEMS accuracy evaluation and calibration support.
UV Flue Gas Analyzer for environmental monitoring projects
MH3200A UV flue gas analyzer based on UV differential optical absorption spectroscopy for SO2, NO, NO2, NH3, CO, CO2 and oxygen-related flue gas applications.
MH3200A is selected for UV differential absorption spectroscopy analysis of flue gas SO2, NO, NO2, NH3, CO and CO2, with oxygen content measurement and CEMS accuracy evaluation support.
The instrument uses a hot-wet method: flue gas is extracted into a UV detection gas cell, with heated filter element, heated gas cell and heated path to vaporize moisture and reduce liquid water influence. The optical components use buffering and shock absorption for field use.
Technical data for model selection
Review the main measuring range, output interface, operating conditions and configuration notes before quotation.
Huisheng confirms the final model, range and site configuration according to sample condition and monitoring requirement.
| Item | Specification / selection note |
|---|---|
| Analyzer route | AG-UVI13 UV-DOAS analyzer is listed in the CEMS gas-analysis subsystem |
| Typical measured gases in CEMS scope | SO2, NOx, CO, CO2, O2, HCl, HF and other project-specific gases depending on selected analyzer route |
| System position | Installed as part of gas analysis cabinet with heated sampling, pretreatment and data acquisition |
| Sample route | Heated sampling probe, heated line, precision filtration and condenser pretreatment are described in the CEMS manual |
| Data interface context | CEMS system includes data acquisition/conversion module, IPC and system software |
Configured around the actual monitoring point
Gas sampling, heated line, pretreatment, analyzer and condition sensors work together as one emission monitoring chain.
Stack gas, industrial exhaust, combustion flue gas or source emission points
Temperature, moisture, dust, solids, corrosive components or compound type may affect configuration.
Analyzer, detector, sampler, cabinet, pretreatment and data output can be combined as one product package.
Specifications are prepared according to the selected model and actual project requirement.
Details Huisheng reviews before confirming a model
Huisheng reviews the product model together with the measured medium, target range, sampling condition, installation position and required specifications. This keeps the product discussion tied to the real monitoring point.
Expected concentration or detection level helps determine the model and measurement method.
Temperature, moisture, suspended solids, dust, corrosion or target compound behavior may change the configuration.
Gas sampling, heated line, pretreatment, analyzer and condition sensors work together as one emission monitoring chain.
Stack platform, analyzer cabinet, sampling line and data acquisition location
Communication output, alarm logic and model-specific specifications depend on the selected model.
Monitoring indicators covered by this product series
The final parameter package depends on the selected model, measuring range, sample condition and data output requirement. For many projects, one instrument is part of a complete monitoring point rather than a stand-alone purchase.
MH3200A
UV flue gas analysis item for hot-wet stack gas analysis and CEMS accuracy support.
UV-DOAS
UV flue gas analysis item for hot-wet stack gas analysis and CEMS accuracy support.
SO2
Stack gas indicator used for emission source monitoring and reporting.
NO
Stack gas indicator used for emission source monitoring and reporting.
NO2
Stack gas indicator used for emission source monitoring and reporting.
NH3
Gas indicator used for VOC, toxic gas, hazardous area or industrial boundary monitoring.
CO
Stack gas indicator used for emission source monitoring and reporting.
CO2
Stack gas indicator used for emission source monitoring and reporting.
O2
Stack gas indicator used for emission source monitoring and reporting.
How the product fits into a complete monitoring chain
Most projects connect the product with sample access, conditioning, measurement, data acquisition and reporting. The exact arrangement depends on the site and selected model.
Heated sampling probe and filter
The sample access point determines whether filtration, heating, flow control or preservation is required.
Heated line and optical gas cell
This part is configured according to the selected model and actual site conditions.
UV differential absorption spectroscopy module
This part is configured according to the selected model and actual site conditions.
Oxygen / temperature / humidity support as configured
This part is configured according to the selected model and actual site conditions.
Display, data query and communication section
Data acquisition, alarm output and communication must match the project platform or reporting requirement.
Where this equipment is usually discussed
Emission applications depend on the stack or duct condition. Gas temperature, dust load, moisture, sampling platform and reporting purpose all influence the analyzer, sampler or complete CEMS configuration.
Applied at fixed emission sources where sample extraction, condition measurement and reporting output must work as one chain.
Configured according to the monitoring point, sample condition, installation environment and expected data use.
Applied at fixed emission sources where sample extraction, condition measurement and reporting output must work as one chain.
Configured according to the monitoring point, sample condition, installation environment and expected data use.
Configured according to the monitoring point, sample condition, installation environment and expected data use.
Verified product photos for model review
Additional CEMS, analyzer, dust monitoring and stack-condition product views from Huisheng gas-monitoring materials.
