Smoke Dust Tester
QL-9000 portable integrated smoke dust tester for particulate sampling, beta-ray direct reading and flue gas measurement tasks.
Smoke Dust Tester for environmental monitoring projects
QL-9000 smoke, dust and particulate concentration tester for fixed pollution source particulate sampling, direct particulate concentration reading and flue gas pollutant measurement.
QL-9000 is a portable integrated instrument combining smoke dust particulate sampling, particulate concentration detection, flue gas pollutant detection and flue gas pollutant sampling. It can support fixed pollution source testing and CEMS accuracy evaluation and calibration.
The system supports two particulate functions: gravimetric sampling and beta-ray absorption direct reading. It can also support gas pollutant measurement and sampling, pipe exhaust parameters such as atmospheric pressure, dynamic pressure, static pressure, temperature, flow velocity, moisture, oxygen content and combustion efficiency depending on configuration.
Technical data for model selection
Review the main measuring range, output interface, operating conditions and configuration notes before quotation.
Huisheng confirms the final model, range and site configuration according to sample condition and monitoring requirement.
| Item | Specification / selection note |
|---|---|
| Product direction | Smoke dust / particulate testing equipment for stack emission inspection and CEMS verification support |
| Related standards in gas manuals | GB/T 16157-1996, HJ/T 48 and HJ/T 47 are referenced in gas monitoring materials |
| Monitoring context | Particulate matter, dust concentration, stack sampling condition and field inspection |
| Configuration basis | Stack condition, dust load, temperature, humidity, sampling method and test requirement |
Configured around the actual monitoring point
The working method is confirmed according to selected model, monitored medium and project requirement.
Stack gas, industrial exhaust, combustion flue gas or source emission points
Temperature, moisture, dust, solids, corrosive components or compound type may affect configuration.
Analyzer, detector, sampler, cabinet, pretreatment and data output can be combined as one product package.
Specifications are prepared according to the selected model and actual project requirement.
Details Huisheng reviews before confirming a model
Huisheng reviews the product model together with the measured medium, target range, sampling condition, installation position and required specifications. This keeps the product discussion tied to the real monitoring point.
Expected concentration or detection level helps determine the model and measurement method.
Temperature, moisture, suspended solids, dust, corrosion or target compound behavior may change the configuration.
The working method is confirmed according to selected model, monitored medium and project requirement.
Stack platform, analyzer cabinet, sampling line and data acquisition location
Communication output, alarm logic and model-specific specifications depend on the selected model.
Monitoring indicators covered by this product series
The final parameter package depends on the selected model, measuring range, sample condition and data output requirement. For many projects, one instrument is part of a complete monitoring point rather than a stand-alone purchase.
QL-9000
Smoke dust testing item for particulate sampling, direct reading and source emission inspection.
Particulate sampling
Smoke dust testing item for particulate sampling, direct reading and source emission inspection.
Beta-ray direct reading
Smoke dust testing item for particulate sampling, direct reading and source emission inspection.
Smoke dust
Smoke dust testing item for particulate sampling, direct reading and source emission inspection.
Flue gas pollutants
This item is confirmed by the selected model, measuring range, sample condition and site requirement.
Pitot tube method
Smoke dust testing item for particulate sampling, direct reading and source emission inspection.
How the product fits into a complete monitoring chain
Most projects connect the product with sample access, conditioning, measurement, data acquisition and reporting. The exact arrangement depends on the site and selected model.
Sampling probe and particulate collection path
The sample access point determines whether filtration, heating, flow control or preservation is required.
Gravimetric particulate sampling module
This part is configured according to the selected model and actual site conditions.
Beta-ray direct reading module
This part is configured according to the selected model and actual site conditions.
Flue gas pollutant measurement / sampling modules
This part is configured according to the selected model and actual site conditions.
Battery and AC/DC power switching system
This part is configured according to the selected model and actual site conditions.
Where this equipment is usually discussed
Emission applications depend on the stack or duct condition. Gas temperature, dust load, moisture, sampling platform and reporting purpose all influence the analyzer, sampler or complete CEMS configuration.
Configured according to the monitoring point, sample condition, installation environment and expected data use.
Applied at fixed emission sources where sample extraction, condition measurement and reporting output must work as one chain.
Configured according to the monitoring point, sample condition, installation environment and expected data use.
Selected when representative field collection, controlled flow and later analysis are part of the monitoring method.
Configured according to the monitoring point, sample condition, installation environment and expected data use.
Verified product photos for model review
Additional CEMS, analyzer, dust monitoring and stack-condition product views from Huisheng gas-monitoring materials.
