Pipeline Water Quality Online Monitor
AG-YG07 pipeline water quality monitor for distributed pipeline, water network and online cabinet monitoring projects.
Pipeline Water Quality Online Monitor for environmental monitoring projects
AG-YG07 pipeline water quality online monitor for sewage networks, rainwater networks, water supply pipelines and distributed water quality monitoring points.
AG-YG07 is selected when the monitoring point is located on a pipeline or distributed network rather than a conventional open channel or laboratory sample point.
Pipeline monitoring projects focus on stable intake, installation space, pressure condition, maintenance access, communication output and parameter selection. AG-YG07 can be discussed with sensor or analyzer modules according to sewage, rainwater, water supply or process-water network requirements.
Technical data for model selection
Review the main measuring range, output interface, operating conditions and configuration notes before quotation.
Huisheng confirms the final model, range and site configuration according to sample condition and monitoring requirement.
| Item | Specification / selection note |
|---|---|
| Model | AG-YG07 pipeline water quality monitor |
| Application scope | Sewage pipeline monitoring, rainwater pipeline monitoring and water-supply pipeline monitoring |
| Monitoring parameters | Five parameters, COD, ammonia nitrogen, chlorophyll, blue-green algae and other configurable indicators |
| Protection grade | IP68 for battery unit, control unit and monitoring unit |
| Installation method | Battery unit and control unit wall-mounted; monitoring unit submersible |
| Battery capacity | 12V, 60000mAh; configurable |
| Data transmission | 4G, CDMA, BD and other methods are listed |
| System power | Control unit 0.5W; monitoring unit 2W |
| Communication | RS485, standard Modbus protocol |
| Dimensions / weight | Battery unit D140 mm x L160 mm, 5.0 kg; control unit 135 x 160 x 57 mm, 1.8 kg; monitoring unit D110 mm x L358 mm, 3.7 kg |
Configured around the actual monitoring point
The working method is confirmed according to selected model, monitored medium and project requirement.
Wastewater, surface water, process water or water network points
Temperature, moisture, dust, solids, corrosive components or compound type may affect configuration.
Analyzer, detector, sampler, cabinet, pretreatment and data output can be combined as one product package.
Specifications are prepared according to the selected model and actual project requirement.
Details Huisheng reviews before confirming a model
Huisheng reviews the product model together with the measured medium, target range, sampling condition, installation position and required specifications. This keeps the product discussion tied to the real monitoring point.
Expected concentration or detection level helps determine the model and measurement method.
Temperature, moisture, suspended solids, dust, corrosion or target compound behavior may change the configuration.
The working method is confirmed according to selected model, monitored medium and project requirement.
Indoor cabinet, outdoor station, shelter or process-side installation depending on site
Communication output, alarm logic and model-specific specifications depend on the selected model.
Monitoring indicators covered by this product series
The final parameter package depends on the selected model, measuring range, sample condition and data output requirement. For many projects, one instrument is part of a complete monitoring point rather than a stand-alone purchase.
AG-YG07
Outdoor station or pipeline monitoring item for field and network water-quality points.
Pipeline monitoring
This item is confirmed by the selected model, measuring range, sample condition and site requirement.
Water network
This item is confirmed by the selected model, measuring range, sample condition and site requirement.
Distributed points
This item is confirmed by the selected model, measuring range, sample condition and site requirement.
RS485 / HJ212 discussion
This item is confirmed by the selected model, measuring range, sample condition and site requirement.
Cabinet integration
This item is confirmed by the selected model, measuring range, sample condition and site requirement.
How the product fits into a complete monitoring chain
Most projects connect the product with sample access, conditioning, measurement, data acquisition and reporting. The exact arrangement depends on the site and selected model.
Pipeline sampling or bypass route
This part is configured according to the selected model and actual site conditions.
Sensor / analyzer module according to parameter
This part is configured according to the selected model and actual site conditions.
Local cabinet or protection enclosure
This part is configured according to the selected model and actual site conditions.
Data acquisition and communication
Data acquisition, alarm output and communication must match the project platform or reporting requirement.
Maintenance and calibration access
This part is configured according to the selected model and actual site conditions.
Where this equipment is usually discussed
Water monitoring applications are selected by monitoring point first: discharge outlet, treatment process, river station, water network or industrial process water. The instrument scope then follows the parameter group, sample condition and cabinet arrangement.
Configured according to the monitoring point, sample condition, installation environment and expected data use.
Suitable for distributed water points where physical, nutrient or chemical indicators need continuous observation.
Suitable for distributed water points where physical, nutrient or chemical indicators need continuous observation.
Suitable for distributed water points where physical, nutrient or chemical indicators need continuous observation.
Suitable for distributed water points where physical, nutrient or chemical indicators need continuous observation.
